Christmas Lights Cost Calculator: LED vs Old Bulbs

Christmas lights cost calculator: see what LED and old incandescent strings cost to run this season at the latest electricity rate, with simple ways to save.

Share this post
7 min read

Last updated November 21, 2026

Light-emitting diode (LED) Christmas lights cost very little to run, often well under $1 per string for the whole season. Old incandescent bulbs can cost many times more.

Take a 25-bulb string of old 7-watt C7 bulbs, lit 6 hours a night for 40 nights. It costs about $7.63 at today’s average rate. A 100-bulb LED string costs about 22 cents.

Christmas lights cost calculator

Digieh calculator. Default LED watts come from an ENERGY STAR example. The rate is the August 2026 national average from the Energy Information Administration.

Key Takeaways.
  • LED light strings use about 92 percent less energy than old incandescent strings.
  • ENERGY STAR certified LED strings use no more than 0.2 watts per bulb.
  • One 7-watt incandescent bulb uses as much power as about 140 small LEDs.
  • A timer that runs lights 6 hours a night keeps costs and fire risk down.
  • Most of a display’s cost comes from old bulbs and big lit decorations.

Jump to a section

How to Work Out the Cost

The math is the same as for any electric device. You need total watts, hours of use and your electricity rate.

  1. Multiply the number of bulbs by the watts per bulb to get total watts.
  2. Divide by 1,000 to get kilowatts.
  3. Multiply by hours per night and number of nights.
  4. Multiply by your rate in dollars per kilowatt-hour.

Worked example

Take 25 incandescent C7 bulbs at 7 watts each. That is 175 watts, or 0.175 kilowatts.

Light them 6 hours a night for 40 nights, which is 240 hours. At 18.16 cents, the season costs about $7.63.

$7.63Season cost of one 25-bulb string of 7-watt bulbs, 6 hours a night for 40 nights. Digieh calculation from federal rate data.

Finding the Watts per Bulb

Check the box, the tag near the plug or the product page. Many list total watts for the string. Divide that by the number of bulbs to get watts per bulb.

  • Old large C7 bulbs are often 5 to 7 watts each, as the ENERGY STAR example shows.
  • ENERGY STAR LED strings must use 0.2 watts or less per bulb.
  • Many small LED bulbs use far less, such as the 0.05 watts in the ENERGY STAR example.

The ENERGY STAR page notes that one 7-watt incandescent bulb could power 140 LEDs. That is enough for two 24-foot strings.

Christmas Lights Cost by Type

Light typeTotal wattsSeason cost (6 hours, 40 nights)
25 incandescent C7 bulbs at 7 watts175$7.63
100 LED bulbs at 0.2 watts (ENERGY STAR maximum)20$0.87
100 LED bulbs at 0.05 watts5$0.22
300 LED bulbs on a tree at 0.05 watts15$0.65

Source: Digieh calculation using watt figures from ENERGY STAR and 18.16 cents per kilowatt-hour from the Energy Information Administration.

The real number depends on your bulbs and rate. Use the calculator with the watts printed on your own lights.

A Sample Home Display

Costs add up with more strings and lit decorations. The Connecticut Office of Consumer Counsel once priced a full incandescent display at about $80.50 for a season.

The same display with LED lights came to about $9.43 in its estimate. Its figures used older national rates and 12 hours a day for 45 days.

Our example at today’s rate

Picture 10 LED strings of 100 bulbs on the house and 3 on the tree, each at 0.05 watts. That is 65 watts in total.

Lit 6 hours a night for 40 nights, it costs about $2.83 at 18.16 cents. Swap the same 13 strings for old 7-watt C7 bulbs, 25 to a string, and it jumps to about $99.

Source: Digieh calculation. 13 LED strings at 5 watts, and 13 strings at 175 watts, at the August 2026 average rate.

What kind of Christmas lights do you use?

  • All LED
  • All old bulbs
  • A mix of both
  • Not sure

Is It Worth Switching to LED?

For energy alone, a single new string pays back slowly if your old string has few bulbs. The savings grow with big displays and long hours.

  • LED strings use about 92 percent less energy, says ENERGY STAR.
  • They can last up to 10 times longer.
  • Certified strings carry a warranty of at least 3 years.
  • They stay cool to the touch, which lowers fire risk.
  • You can connect more LED strings end to end without overloading.

If your old strings still work, replace them as they fail. Start with the strings you leave on the longest.

Free updates

Join the Digieh list

Be the first to know when our weekly brief launches.

No spam. Unsubscribe anytime. Read our Privacy Policy.

Inflatables and Other Decorations

Lit inflatables, projectors and animated figures often use more power than light strings. Their fans and motors run the whole time they are on.

To price one, find the watts on its label. Enter 1 as the number of bulbs and the full wattage as watts per bulb. The calculator then works for any plug-in decoration.

Big displays with many inflatables can cost more than all your strings combined. A timer on these pays off fastest.

Indoor Tree vs Outdoor Display

An indoor tree usually has a few hundred small bulbs. With LED bulbs, it may cost well under $1 for the season, even with long evenings.

Outdoor displays tend to cost more. They use more strings, larger bulbs and decorations that run for many hours.

Rooflines with old C7 or C9 bulbs are the biggest single cost for many homes. Switching just those to LED can cut most of the bill.

Reading Your December Electric Bill

Your bill shows how many kilowatt-hours you used and your price per kilowatt-hour. Compare December with November to see how much the season added.

Heating, longer evenings and holiday cooking all raise winter use. Lights are often a small part, especially if they are LED.

If your bill jumps far more than the calculator suggests, look at heaters, older appliances or electric water heating first.

How Many Hours Should Lights Stay On?

Most people light displays from dusk until bedtime, about 5 to 6 hours. Leaving lights on all night doubles the hours and the cost.

Turning lights off overnight also lowers fire risk. A timer makes it automatic, so you never forget.

Want the look in the morning too? Add a short second slot before sunrise instead of running lights all night.

Ways to Cut the Cost

  • Use a timer or smart plug so lights run only in the evening.
  • Turn lights off when you go to bed.
  • Switch the most-used strings to LED first.
  • Use fewer, brighter strings for the same look.
  • Pick solar-powered stake lights for the yard.
  • Check your utility for time-of-use rates and avoid peak hours.

A smart plug can switch lights on at dusk and off at bedtime. See idea 2 in our smart plug guide.

Running a space heater too this winter? Our space heater cost calculator shows what that adds.

Safety Reminders

  • Check strings for broken bulbs, cracked sockets and frayed wires.
  • Use outdoor-rated lights and cords outside.
  • Do not run cords under rugs or through doors.
  • Follow the box limit on how many strings to connect.
  • Turn lights off when you leave home or go to sleep.

For step-by-step hanging tips, read our guide on how to hang Christmas lights safely.

Try this today. Check the wattage label on one string tonight. Enter it in the calculator to see your real season cost.

Test Yourself

About how much less energy do ENERGY STAR LED light strings use than incandescent ones?

  1. About 25 percent less
  2. About 50 percent less
  3. About 92 percent less

ENERGY STAR says certified LED light strings use about 92 percent less energy than conventional incandescent strings.

Frequently Asked Questions

Do Christmas lights use a lot of electricity?

LED lights use very little. Old incandescent strings and large lit decorations use much more.

How much does it cost to leave Christmas lights on all night?

Enter 12 or more hours per night in the calculator. LED strings usually still cost only cents per night.

Are LED Christmas lights cheaper to run?

Yes. They use about 92 percent less energy than incandescent strings.

Conclusion

LED Christmas lights cost cents per season, while old bulbs can cost dollars per string. A timer adds more savings.

Your next step is to read the watts on your lights and run them through the calculator.

Editor’s Note

This article is accurate as of November 21, 2026. Watt figures come from ENERGY STAR and the rate from the Energy Information Administration. Cost figures are Digieh calculations.

Spot an error in this article? Please contact us at support@digieh.com or read our Corrections Policy.

Keep exploring

Your next read is waiting

Found this useful?

Share this post
Avatar photo

Syed Wasif Raza

Syed Wasif Raza is the founder and editor of Digieh. He writes about health, food, lifestyle, news and sports in plain, easy English. Every guide he publishes is checked against official sources such as government and health agency pages. Connect with him on LinkedIn.

Articles: 734

Leave a Reply

Your email address will not be published. Required fields are marked *